|
Imation 909 Reader-Printer Paper
for Kodak IMT Series, Starvue, and Starfiche Reader-Printers

Description
|
Imation I.D. Number
|
8 1/2 x 450' roll
K-Canister
|
78-6969-6018-2
|
Imation 909 Reader-Printer Paper produces high quality dry silver prints in Kodak IMT Series, Starvue and
Starfiche Reader-Printers. Daylight-loading K-canisters offer safe, convenient handling and storage.
An improved formulation gives you sharp, clear, black-on-white images and better environmental stability.
And a low cost and extended shelf life mean you save money without sacrificing quality. Plus, as with
all our products, you get the reliability, worldwide availability and service of Imation.
Imation 909 Reader-Printer Paper provides:
- Excellent development latitude - high quality prints from marginal film originals
- Sharp, black-on-white images - clean, clear, and easy to read
- Extended shelf life - up to 12 months at room temperature
- Convenient packaging - canisters are easy-loading, light-tight and can be handled safely outside the dark room
- Dry processing - no chemicals or toner for safer, cleaner handling and less mess
- Environmental stability
Loading Instructions
 | 1. Pull handle to second stop and remove used paper canister. If no paper protrudes from canister, check paper path for paper scraps. |
 | 2. Prepare new canister by releasing end of paper as indicated in instructions on canister label. Load into printer and press canister firmly down behind clips. |
 | 3. Push paper under paper guide and pull out the other side. Position and hold paper taut between tabs while closing handle to first stop. |
 | 4. Tear paper cleanly against the paper guide. Push handle fully forward. Close printer cover. Make one print to remove fogged paper. |
Setting development temperature
Before printing, set development temperature dial to "C" (dial settings go from A to F). If
the print is too dark, reduce dial settings (towards A) until the correct exposure is reached.
If the print is too light, increase dial settings (towards F).

Development temperature dial on Kodak IMT Series and Starvue Reader-Printers
|

Development temperature dial on Starfiche Reader-Printers
|
Use and Storage
For best results, use before date marked on each canister. Store canisters at conditions
below 75 F (24 C) and 55% relative humidity and keep away from photographic chemicals,
ammonia, and exhaust fumes that can contaminate the paper and accelerate the aging process.
Dimensions
Canister
Length: 9.55 inches max.
Width: 5.35 inches max.
Height: 5.35 inches max.
Paper Roll
Length: 450 feet
Width: 8.5 inches
Copyright 1996 Imation. All rights reserved.
|